Features
- 400 W continuous program power capacity
- 51 mm (2 in) copper voice coil
- 70 - 3000 Hz response
- 94 dB sensitivity
- Shorting copper cap for extended HF response
Specifications
- Nominal Diameter200 mm (8.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance7.0 Ω
- Nominal Power Handling1200 W
- Continuous power handling2400 W
- Sensitivity (1W/1m)394.0 dB
- Frequency Range70 - 3000 Hz
- Voice Coil Diameter51 mm (2.0 in)
- Winding MaterialCopper
- Former MaterialKapton
- Winding Depth16.0 mm (0.62 in)
- Magnetic Gap Depth8.0 mm (0.31 in)
- Flux Density1.1 T
Design
- Surround ShapeDouble Roll
- Cone ShapeExponential
- Magnet MaterialFerrite
- SpiderSingle
- Pole DesignT-Pole
- Woofer Cone TreatmentNone
- Recommended Enclosure14.0 dm3 (0.49 ft3)
- Recommended Tuning73 Hz
Parameters4
- Resonance Frequency73 Hz
- Re5.4 Ω
- Qes0.36
- Qms4.2
- Qts0.33
- Vas14.0 dm3 (0.49 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀1.5 %
- Xmax± 5.0 mm
- Xvar± 4.0 mm
- Mms23.0 g
- Bl12.6 Txm
- Le0.5 mH
- EBP202 Hz
Mounting and Shipping Info
- Overall Diameter225 mm (8.8 in)
- Bolt Circle Diameter210 mm (8.3 in)
- Baffle Cutout Diameter187.0 mm (7.4 in)
- Depth91 mm (3.6 in)
- Flange and Gasket Thickness11 mm (0.4 in)
- Air Volume Occupied by Driver1.2 dm3 (0.04 ft3)
- Net Weight3.3 kg (7.28 lb)
- Shipping Units1
- Shipping Weight3.75 kg (8.27 lb)
- Shipping Box255x255x150 mm (10.04x10.04x5.91 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.