Features
- 400 W continuous program power capacity
- 51 mm (2 in) copper voice coil
- 70 - 3000 Hz response
- 97 dB sensitivity
- Neodymium ring magnet assembly
- Shorting copper cap for extended HF response
- Ventilated voice coil gap for reduced power compression
Specifications
- Nominal Diameter200 mm (8.0 in)
- Nominal Impedance4 Ω
- Minimum Impedance3.7 Ω
- Nominal Power Handling1200 W
- Continuous power handling2400 W
- Sensitivity (1W/1m)397.0 dB
- Frequency Range70 - 3000 Hz
- Voice Coil Diameter51 mm (2.0 in)
- Winding MaterialCopper
- Former MaterialGlass Fibre
- Winding Depth16.0 mm (0.65 in)
- Magnetic Gap Depth10.0 mm (0.4 in)
- Flux Density1.3 T
Design
- Surround ShapeDouble Roll
- Cone ShapeExponential
- Magnet MaterialNeodymium Ring
- SpiderSingle
- Pole DesignT-Pole
- Woofer Cone TreatmentTWP Waterproof Both Sides
Parameters4
- Resonance Frequency76 Hz
- Re2.5 Ω
- Qes0.26
- Qms5.3
- Qts0.25
- Vas10.6 dm3 (0.37 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀1.76 %
- Xmax± 6.0 mm
- Xvar± 5.0 mm
- Mms27.0 g
- Bl11.2 Txm
- Le0.2 mH
- EBP292 Hz
Mounting and Shipping Info
- Overall Diameter225 mm (8.8 in)
- Bolt Circle Diameter210 mm (8.3 in)
- Baffle Cutout Diameter187.0 mm (7.4 in)
- Depth100 mm (4.0 in)
- Flange and Gasket Thickness11 mm (0.4 in)
- Air Volume Occupied by Driver1.1 dm3 (0.04 ft3)
- Net Weight3.05 kg (6.72 lb)
- Shipping Units1
- Shipping Weight3.5 kg (7.72 lb)
- Shipping Box255x255x150 mm (10.04x10.04x5.91 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2V for 4 ohm Nominal Impedance
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.